• Big brands sign up to low carbon diet
• Five weeks left to register for CRC

• Construction starts on World's 'first industrial-scale' biofuels plant to use municipal waste
• Water use threatens 21% of African freshwater species

• Introducing draintector, the pneumatic drain sealing system from Darcy.
• As part of the ecotector family of products, draintector offers a complete solution to your spill prevention and protection needs. 

Stop pollution at the flick of a switch.  A complete solution to your spill prevention and protection needs.

Draintector™ rapidly seals drains, stopping pollution of the watercourse at the flick of a switch.  With simple, low-cost installation requiring no civil works, Draintector™ can be independently powered (solar or battery) where mains power is unavailable.

draintector™, from the manufacturers of envirovalve, offers a complete solution to your spill prevention and protection needs.  draintector™ offers excellent cost savings in management time and helps prevent potential environmental liability, prosecution and the resultant negative publicity as the result of a spill.  The unique draintector™ bladder mechanism allows preventive and emergency activations of the system with the added benefit of automatic pumped deflation.

How it works

Activate at the control panel	... or remotely from any location

This immediate response system provides valuable time to implement cleanup operations. From the makers of envirovalve, draintector™ can be controlled at the touch of a button from anywhere which makes envirovalve the ultimate in drain protection.  draintector™ is a fitting replacement for penstock valves and a valuable ally in pollution prevention and control system.

Draintector™ is far more cost effective than mechanical gate and penstock valves and is installed in a fraction of the time with minimal disruption to business operations.

4 goods reasons to use Draintector™

Power

• Solar for remote locations where no mains supply is available
• Mains
• Battery
• Any combination of the above

Activation

• The draintector™ drain security system can be controlled and activated at the touch of a button from anwhere.  Below are listed the standard activation methods currently available.  Please do not hesitate to contact us if your preferred method of activation is not listed to discuss your individual requirements.

  • Manual activation.  The draintector™ unit comes complete with manual activation as standard.  The unit can only be activated by opening the system cabinet and turning the "on/off" switch within to the "on" position by hand.  The manually operated switch activates the pump, powered by a 12volt d.c. battery, which inflates the bladder, blocking the drain.  Once the bladder reaches its preset pressure the system is sealed and the pump is set to re-pressure the bladder if required.
  • Hard wired remove.  The draintector™ unit can be activated any distance away from the system cabinet using a non powered static volt free switching that is hard wired back to the system cabinet.  Switching can be manual or from some other system such as a fire alarm, ph meter, level controller etc.  The draintector™ unit can also be activated as per standard manual activation.  The unit can only be deactivated locally and requires a battery plus either mains or solar power for operation.
  • GSM.  The draintector™ unit can be activated from any distance using a mobile phone to send a text message.  There is no physical connection to the system cabinet.  The draintector™ unit can also be activated as per standard manual activation.  The unit can only be deactivated locally and requires a battery plus either mains or solar power for operation.
  • Sensor activated.  The draintector™ unit can be activated any distance away from the system cabinet using a mains powered static terminal that transmits an activation signal to the cabinet upon receipt of a (volt free) signal from some other system such as a fire sensor, pH sensor, oil sensor, turbidity sensor or level sensor.  There is no physical connection to the system cabinet.  The draintector unit can also be activated as per standard manual activation.  The unit can only be deactivated locally and requires a battery plus either mains or solar power for operation.Manual – push button at the control panel to activate and deactivate the system

draintector - the ultimate drain protection device providing instant security against the polluting of controlled waters.

Call free for full details on draintector and our special launch offers 0800 0370 899.

Alternatively indicate below your preferred draintector unit type, activation and power methods to receive a full quotation.

Request A Quote

Code	Name	Qty Required
	draintector type - PREVENTIVE
	draintector type - REACTIVE
	activation - TURBIDITY SENSOR
	activation - PH SENSOR
	activation - OIL SENSOR
	activation - FIRE SENSOR
	activation - HARD WIRED REMOTE
	activation - REMOTE CONTROL
	activation - LEVEL SENSOR
	activation - MANUAL
	power - BATTERY
	power - MAINS
	power - GSM

Please fill in the rest of your details below

Quote Summary

Contact Details

Title: - Select - Mr Mrs Ms Miss Dr

First name:

Surname:

Contact Number :

Email Address :

Company name:

Position in company:

Additional Information :

How did you find us? - Select - Search engine Insert in magazine Press advert Press release Email promotion Recommendation Previous customer Telesales/Marketing Direct mail Exhibition Other: please specify

Other

I do NOT wish to recieve emails regarding all the products & offers darcy has to offer