Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
draintector installation

draintector - the ultimate in pollution prevention

Stop pollution at the flick of a switch.  A complete solution to your spill prevention and protection needs.

Draintector™ rapidly seals drains, stopping pollution of the watercourse at the flick of a switch.
With simple, low-cost installation requiring no civil works, Draintector™ can be independently powered (solar or battery) where mains power is unavailable.

Draintector™ is far more cost effective than mechanical gate and penstock valves and is installed in a fraction of the time with minimal disruption to business operations.

4 goods reasons to use Draintector™

1. Cost effective value

  • Costs less than traditional mechanical gate and penstock valves
  • Simple low-cost installation, no civil work required
  • Requires no mains power supply
  • Multiple use with no post-activation servicing costs

2. Meets environmental legislation

  • Environment Agency Guidelines – PPG2, PPG11
  • Anti-Pollution Works Regulations 1999
  • Water Industry Act 1991
  • Helps achieve ISO 14001
3. Simple methods of activation
  • Manually at the control panel
  • Automatically by GSM
  • Remotely by radio control
  • External activation by pH or oil probes, COD and toxidity monitors
  • Onsite management systems and fi re alarms

4. Versatile

  • Proactive – block drains at time of high risk including deliveries and during site maintenance.
  • Reactive – in the event of a spill rapidly creates a tight seal in the drain preventing spilt liquids entering controlled waters
  • Self deflation system allows the unit to be ready for repeat use
  • For use in all types of drain and sizes 4” (100mm) – 48” (1200mm)
  • Has a broad hydrocarbon and chemical compatibility
 

Power

  • Solar for remote locations where no mains supply is available
  • Mains
  • Battery
  • Any combination of the above

Activation

  • Manual – push button at the control panel to activate and deactivate the system
  • GSM – simple text message or phone call to activate the system
  • Remote – where line of site is available to activate the system
  • Hard wired – for activation by external probes, sensors, alarms or other linked devices. Also for remote push button location

How it works

 Activate at the control panel

... or remotely from any location 

 Activation of draintector via the control panel  Remote activation of draintector

For further details on draintector please contact Darcy on 0800 0370 899 or complete the form below:

 

top pic
For all general enquiries please fill in the form below & press submit.
bottom pic